Waterproofing Projects across the UAE
A portfolio of live projects with real photos and on-site video: industrial metal roofs, combo system decks and polyurea water tank linings, all sealed with seamless, spray-applied systems.
- Metal roofs
- Combo roof systems
- Polyurea tanks
Real crews, real jobs, tested resultsFree site inspection
We assess and quote at no cost, anywhere in the UAE.
Seamless systems
Joint-free polyurea and PU with no laps to fail.
Up to 10-year warranty
On completed works, backed in writing.
DM-registered materials
Approved systems with full data sheets.
Metal roof waterproofing and recoating
A leaking, sun-worn industrial metal roof of roughly 1,200 m² was corroding at the seams and fixings. We restored it in place with no tear-off, using a seamless, reflective coating that seals every rib, lap and screw while cutting heat gain.
- System
- Elastomeric coating over metal deck
- Scope
- About 1,200 m² industrial roof
- Location
- Industrial area, Abu Dhabi
- Finish
- Seamless and heat-reflective
What we did
- Cleaned and de-rusted the profiled sheeting and treated corroded fixings.
- Sealed all seams, side-laps and screw heads against water tracking.
- Spray-applied a seamless coating in even, overlapping passes.
- Left a reflective, watertight surface, checked section by section.





Combo roof waterproofing system
For a roof of around 900 m² in a high-exposure coastal location we installed our combo system: sprayed PU foam heat insulation, a seamless membrane and a protective finish that seals the deck and details every upstand and plinth.
- System
- Combo: PU foam, membrane, top coat
- Scope
- About 900 m² roof and podium
- Location
- Coastal building, UAE
- Warranty
- Up to 10 years
What we did
- Prepared the deck and repaired cracks and blowholes.
- Coved every parapet, upstand and plinth with sprayed PU foam.
- Laid a seamless waterproofing membrane across the full deck.
- Finished with a protective top coat for UV and wear resistance.






Polyurea water tank waterproofing
Inside a large concrete water tank in Al Ain we spray-applied a seamless polyurea lining to the walls and floor. Polyurea cures in seconds and bonds fully to the concrete, leaving a jointless, corrosion-resistant barrier that returns to service quickly.
- System
- Spray-applied polyurea lining
- Scope
- Concrete tank, about 600 m² internal
- Location
- Al Ain, UAE
- Cure
- Sets in seconds
What we did
- Drained the tank and mechanically prepared the concrete substrate.
- Repaired the surface and applied a bonding primer.
- Spray-applied a seamless polyurea membrane to floor and walls.
- Delivered a jointless, leak-proof, corrosion-resistant lining.



Waterproofing work across the UAE
A closer look at live projects: metal roof recoating, combo roof systems, polyurea tank linings and wet area works.








Waterproofing company near you
We work in every emirate. Choose your location for local coverage, common problems and a free inspection.
Let us quote your waterproofing project
Send us the drawings, the area or simply a few photos. We will inspect the site, recommend the right system and give you an itemised quote.
- Villas to industrial roofs
- Photos and video on completion
- Up to 10-year warranty

