PU Injection
Flexible polyurethane resin that expands to seal active, running water leaks.
PU and epoxy crack injection to seal active leaks under pressure and restore integrity to concrete walls, slabs, basements and tanks across the UAE.
Targeted injection to seal active leaksWe assess and quote at no cost, anywhere in the UAE.
Joint-free polyurea and PU with no laps to fail.
On completed works, backed in writing.
Approved systems with full data sheets.
A crack in concrete is both a leak path and a warning sign. Left untreated, water widens it, corrodes the reinforcement inside and weakens the element. Injection is a precise, low-disruption repair: resin is pumped into the crack under pressure to fill it completely, flexible polyurethane to chase and stop active water, or rigid epoxy to structurally re-bond the concrete. It's the fastest way to stop a running leak without opening up the structure.
Flexible polyurethane resin that expands to seal active, running water leaks.
Rigid structural resin that re-bonds cracked concrete and restores strength.
We trace the leak path first, so the injection actually solves the problem.
We confirm the crack is sealed before finishing and handing over.
Spot these early and a small fix stays small. Book a free inspection before it spreads.
From a single villa to large government facilities, our crack injection scales to any project.
Villas, apartments and townhouses across the UAE.
Offices, retail, malls and hotels.
Warehouses, factories and logistics facilities.
Schools, clinics and public-sector facilities.
We visit the site, diagnose the problem and assess the substrate at no cost.
Cleaning, crack and spall repair, and preparing the substrate.
A bonding primer is applied so the system adheres fully.
The chosen system is applied to the specified thickness by trained crews.
Film-thickness checks and a water or holiday test confirm a continuous barrier.
Clean site, a report, sign-off and your warranty certificate.
We build this system on Kanz Chemical materials registered with Dubai Municipality (DM), supplied with full technical (TDS) and safety (MSDS) data sheets for consultant and authority approval. Potable-water and Civil Defence suitability is confirmed where required, and every completed system is handed over with a warranty certificate of up to 10 years.
Flexible active-leak sealing
Structural crack bonding
Controlled resin delivery
Products are selected per project after inspection. Equivalent DM-approved systems are used where a specification requires.
No laps or seams to fail, removing the most common cause of leaks.
UV resistance, thermal-cycling tolerance and crack-bridging over 350%.
Manufacturer-backed systems with full technical and safety data sheets.
On completed works, with responsive after-sales support.
Measured film thickness and testing on every job, with no sub-contracting.
A free inspection and an itemised quote with no surprises.
Common questions we are asked about crack injection in the UAE.
Based in Musaffah, Abu Dhabi, we deliver to every emirate. Open an emirate below to see the districts we serve.
PU injection seals cracks even while water is flowing. Send us a photo or book an inspection and we will stop the leak and treat what caused it.
