Torch-On Bitumen
APP/SBS modified bituminous membranes, heat-welded at every lap and upstand.
Proven bituminous (torch-on) and sheet membrane systems for roofs, basements and podiums, a reliable, cost-effective barrier installed with correct overlap detailing.
Membrane waterproofing on a coastal roofWe assess and quote at no cost, anywhere in the UAE.
Joint-free polyurea and PU with no laps to fail.
On completed works, backed in writing.
Approved systems with full data sheets.
Sheet membranes remain one of the most widely used and cost-effective waterproofing methods in the UAE. Their performance comes down to workmanship: laps have to be fully heat-welded, upstands correctly dressed, and drains and penetrations carefully detailed. Done properly, a bituminous membrane gives a dependable barrier for many years; done poorly, the laps are exactly where it leaks. We focus on the detailing that makes a membrane last.
APP/SBS modified bituminous membranes, heat-welded at every lap and upstand.
Peel-and-stick membranes for applications where torch-on isn't suitable.
Seamless liquid options where a jointless finish is preferred over sheets.
Careful upstand, drain and penetration detailing, plus leak testing.
Spot these early and a small fix stays small. Book a free inspection before it spreads.
From a single villa to large government facilities, our membrane waterproofing scales to any project.
Villas, apartments and townhouses across the UAE.
Offices, retail, malls and hotels.
Warehouses, factories and logistics facilities.
Schools, clinics and public-sector facilities.
We visit the site, diagnose the problem and assess the substrate at no cost.
Cleaning, crack and spall repair, and preparing the substrate.
A bonding primer is applied so the system adheres fully.
The chosen system is applied to the specified thickness by trained crews.
Film-thickness checks and a water or holiday test confirm a continuous barrier.
Clean site, a report, sign-off and your warranty certificate.
We build this system on Kanz Chemical materials registered with Dubai Municipality (DM), supplied with full technical (TDS) and safety (MSDS) data sheets for consultant and authority approval. Potable-water and Civil Defence suitability is confirmed where required, and every completed system is handed over with a warranty certificate of up to 10 years.
Torch-on sheet membrane
Substrate bonding
Cold-applied option
UV protection
Products are selected per project after inspection. Equivalent DM-approved systems are used where a specification requires.
No laps or seams to fail, removing the most common cause of leaks.
UV resistance, thermal-cycling tolerance and crack-bridging over 350%.
Manufacturer-backed systems with full technical and safety data sheets.
On completed works, with responsive after-sales support.
Measured film thickness and testing on every job, with no sub-contracting.
A free inspection and an itemised quote with no surprises.
Common questions we are asked about membrane waterproofing in the UAE.
Based in Musaffah, Abu Dhabi, we deliver to every emirate. Open an emirate below to see the districts we serve.
Most membrane failures start at laps, upstands and drains. We will inspect your roof or basement and quote a properly detailed system, or a seamless alternative if it suits better.
