Flexible Membrane
A crack-bridging membrane that moves with the pool shell and stays watertight under constant pressure.
Flexible, crack-bridging waterproofing for swimming pools, water features and pool tanks across the UAE, sealed fully before tiling or finishing.
Waterproofing in a demanding, water-exposed settingWe assess and quote at no cost, anywhere in the UAE.
Joint-free polyurea and PU with no laps to fail.
On completed works, backed in writing.
Approved systems with full data sheets.
A pool is one of the most demanding structures to waterproof: it holds constant water pressure, flexes with temperature, and is exposed to pool chemistry and UV. Any weakness in the shell quickly becomes a leak that undermines the surround and wastes water and chemicals. The waterproofing layer has to bond fully to the shell and stay flexible for years, which is why system choice and detailing are critical.
A crack-bridging membrane that moves with the pool shell and stays watertight under constant pressure.
A seamless fibreglass lining that gives a tough, jointless, waterproof shell.
We trace and repair existing leaks, then re-waterproof the affected area.
Systems chosen to withstand pool chemistry, salt and constant sun.
Spot these early and a small fix stays small. Book a free inspection before it spreads.
From a single villa to large government facilities, our swimming pool waterproofing scales to any project.
Villas, apartments and townhouses across the UAE.
Offices, retail, malls and hotels.
Warehouses, factories and logistics facilities.
Schools, clinics and public-sector facilities.
We visit the site, diagnose the problem and assess the substrate at no cost.
Cleaning, crack and spall repair, and preparing the substrate.
A bonding primer is applied so the system adheres fully.
The chosen system is applied to the specified thickness by trained crews.
Film-thickness checks and a water or holiday test confirm a continuous barrier.
Clean site, a report, sign-off and your warranty certificate.
We build this system on Kanz Chemical materials registered with Dubai Municipality (DM), supplied with full technical (TDS) and safety (MSDS) data sheets for consultant and authority approval. Potable-water and Civil Defence suitability is confirmed where required, and every completed system is handed over with a warranty certificate of up to 10 years.
Crack-bridging pool coat
Seamless fibreglass shell
Primer / bonding coat
Products are selected per project after inspection. Equivalent DM-approved systems are used where a specification requires.
No laps or seams to fail, removing the most common cause of leaks.
UV resistance, thermal-cycling tolerance and crack-bridging over 350%.
Manufacturer-backed systems with full technical and safety data sheets.
On completed works, with responsive after-sales support.
Measured film thickness and testing on every job, with no sub-contracting.
A free inspection and an itemised quote with no surprises.
Common questions we are asked about swimming pool waterproofing in the UAE.
Based in Musaffah, Abu Dhabi, we deliver to every emirate. Open an emirate below to see the districts we serve.
A steady drop in level usually means the shell or the detailing has failed. We will trace the leak, repair it and re-waterproof the pool with a flexible, chemical-resistant system.
