Liquid Membrane
A flexible, liquid-applied membrane that moves with the structure and seals the whole floor and walls.
Flexible, seamless waterproofing for bathrooms, kitchens and wet areas across the UAE, sealed properly before tiling so moisture never reaches your walls and floors.
Wet-area waterproofing with foam-coved junctionsWe assess and quote at no cost, anywhere in the UAE.
Joint-free polyurea and PU with no laps to fail.
On completed works, backed in writing.
Approved systems with full data sheets.
Wet areas are the most common source of hidden leaks in UAE homes and buildings. Water passes through grout and weak seals into the screed, then tracks along the slab and shows up as damp on the ceiling of the room below, often far from where it started. Because the damage is hidden until it's serious, getting the waterproofing right before tiling is far cheaper than chasing a leak afterwards.
A flexible, liquid-applied membrane that moves with the structure and seals the whole floor and walls.
Reinforcing mesh at corners, drains and pipe penetrations, the points where wet areas leak first.
We flood-test the finished membrane to confirm it is watertight before any tiling starts.
A continuous barrier across floors, walls, thresholds and around fittings.
Spot these early and a small fix stays small. Book a free inspection before it spreads.
From a single villa to large government facilities, our bathroom & wet area waterproofing scales to any project.
Villas, apartments and townhouses across the UAE.
Offices, retail, malls and hotels.
Warehouses, factories and logistics facilities.
Schools, clinics and public-sector facilities.
We visit the site, diagnose the problem and assess the substrate at no cost.
Cleaning, crack and spall repair, and preparing the substrate.
A bonding primer is applied so the system adheres fully.
The chosen system is applied to the specified thickness by trained crews.
Film-thickness checks and a water or holiday test confirm a continuous barrier.
Clean site, a report, sign-off and your warranty certificate.
We build this system on Kanz Chemical materials registered with Dubai Municipality (DM), supplied with full technical (TDS) and safety (MSDS) data sheets for consultant and authority approval. Potable-water and Civil Defence suitability is confirmed where required, and every completed system is handed over with a warranty certificate of up to 10 years.
Flexible wet-area membrane
Corner and junction detailing
Alternative wet-area coat
Products are selected per project after inspection. Equivalent DM-approved systems are used where a specification requires.
No laps or seams to fail, removing the most common cause of leaks.
UV resistance, thermal-cycling tolerance and crack-bridging over 350%.
Manufacturer-backed systems with full technical and safety data sheets.
On completed works, with responsive after-sales support.
Measured film thickness and testing on every job, with no sub-contracting.
A free inspection and an itemised quote with no surprises.
Common questions we are asked about bathroom & wet area waterproofing in the UAE.
Based in Musaffah, Abu Dhabi, we deliver to every emirate. Open an emirate below to see the districts we serve.
Whether you are renovating or chasing a leak that shows on the ceiling below, we will waterproof and flood-test the area so the problem does not come back.
