Sprayed PU Foam
Rigid foam that insulates and seals the roof in a single spray-applied pass.
Two results in one system, a flexible, seamless polyurethane membrane and, with sprayed PU foam, a thermal insulation layer that cuts heat gain across your roof.
Sprayed PU foam and coating on a roof deckWe assess and quote at no cost, anywhere in the UAE.
Joint-free polyurea and PU with no laps to fail.
On completed works, backed in writing.
Approved systems with full data sheets.
Cooling is the biggest energy cost for most UAE buildings, and a large share of that heat comes straight through the roof. Sprayed PU foam tackles both problems at once: it bonds to the deck as a rigid insulation layer that slows heat transfer, and, protected with a waterproof top coat, it seals the roof against water. Liquid polyurethane membranes add a flexible, crack-bridging option where insulation isn't needed.
Rigid foam that insulates and seals the roof in a single spray-applied pass.
A flexible, mesh-reinforced coating for a tough, seamless waterproof finish.
Foam plus a protective UV coat to reduce heat gain and cooling costs.
Continuous protection over complex roof shapes, upstands and plinths.
Spot these early and a small fix stays small. Book a free inspection before it spreads.
From a single villa to large government facilities, our pu foam & polyurethane scales to any project.
Villas, apartments and townhouses across the UAE.
Offices, retail, malls and hotels.
Warehouses, factories and logistics facilities.
Schools, clinics and public-sector facilities.
We visit the site, diagnose the problem and assess the substrate at no cost.
Cleaning, crack and spall repair, and preparing the substrate.
A bonding primer is applied so the system adheres fully.
The chosen system is applied to the specified thickness by trained crews.
Film-thickness checks and a water or holiday test confirm a continuous barrier.
Clean site, a report, sign-off and your warranty certificate.
We build this system on Kanz Chemical materials registered with Dubai Municipality (DM), supplied with full technical (TDS) and safety (MSDS) data sheets for consultant and authority approval. Potable-water and Civil Defence suitability is confirmed where required, and every completed system is handed over with a warranty certificate of up to 10 years.
Spray polyurethane foam
High-density PU foam
UV protective topcoat
Flexible coating option
Products are selected per project after inspection. Equivalent DM-approved systems are used where a specification requires.
No laps or seams to fail, removing the most common cause of leaks.
UV resistance, thermal-cycling tolerance and crack-bridging over 350%.
Manufacturer-backed systems with full technical and safety data sheets.
On completed works, with responsive after-sales support.
Measured film thickness and testing on every job, with no sub-contracting.
A free inspection and an itemised quote with no surprises.
Common questions we are asked about pu foam & polyurethane in the UAE.
Based in Musaffah, Abu Dhabi, we deliver to every emirate. Open an emirate below to see the districts we serve.
If the top floor is always hot and the cooling bills keep climbing, sprayed PU foam is usually the answer. We will measure the roof and quote foam thickness with a protective top coat.
