Profiled Metal Roofs
A full-roof coating that seals ribs, laps and fixings across the whole span.
Seal metal roofs and wet areas against leaks and corrosion, we recoat profiled sheeting and detail every seam, screw and joint for a watertight, reflective surface.
A recoated metal roof, seams and fixings sealedWe assess and quote at no cost, anywhere in the UAE.
Joint-free polyurea and PU with no laps to fail.
On completed works, backed in writing.
Approved systems with full data sheets.
Metal roofs cover most of the UAE's warehouses and factories, and they leak in predictable places: side-laps, end-laps, fastener heads and flashings, where movement and corrosion break the seal. Replacing sheets is costly and disruptive. Instead we clean, treat corrosion and apply a seamless, flexible coating over the whole roof, sealing every joint and fixing, adding a reflective surface that cuts heat, and extending the life of the existing roof.
A full-roof coating that seals ribs, laps and fixings across the whole span.
Detailing at side-laps, end-laps and fastener heads, where metal roofs leak first.
A reflective finish that cuts heat gain and protects against UV.
Sealed, corrosion-resistant protection for plant decks and wet zones.
Spot these early and a small fix stays small. Book a free inspection before it spreads.
From a single villa to large government facilities, our metal roof & wet area scales to any project.
Villas, apartments and townhouses across the UAE.
Offices, retail, malls and hotels.
Warehouses, factories and logistics facilities.
Schools, clinics and public-sector facilities.
We visit the site, diagnose the problem and assess the substrate at no cost.
Cleaning, crack and spall repair, and preparing the substrate.
A bonding primer is applied so the system adheres fully.
The chosen system is applied to the specified thickness by trained crews.
Film-thickness checks and a water or holiday test confirm a continuous barrier.
Clean site, a report, sign-off and your warranty certificate.
We build this system on Kanz Chemical materials registered with Dubai Municipality (DM), supplied with full technical (TDS) and safety (MSDS) data sheets for consultant and authority approval. Potable-water and Civil Defence suitability is confirmed where required, and every completed system is handed over with a warranty certificate of up to 10 years.
Seamless over-sheet membrane
Corrosion treatment
Lap and screw detailing
Reflective UV topcoat
Products are selected per project after inspection. Equivalent DM-approved systems are used where a specification requires.
No laps or seams to fail, removing the most common cause of leaks.
UV resistance, thermal-cycling tolerance and crack-bridging over 350%.
Manufacturer-backed systems with full technical and safety data sheets.
On completed works, with responsive after-sales support.
Measured film thickness and testing on every job, with no sub-contracting.
A free inspection and an itemised quote with no surprises.
Common questions we are asked about metal roof & wet area in the UAE.
Based in Musaffah, Abu Dhabi, we deliver to every emirate. Open an emirate below to see the districts we serve.
Sealing seams, laps and fasteners in place costs a fraction of a tear-off and adds a reflective finish that cuts heat. We will survey the roof and quote per square metre.
