+971 50 442 4730 +971 55 591 1894 [email protected] Musaffah, Abu Dhabi Mon to Sat, 8AM to 5PM
Home › Services › Polyurea Spray Coating
Polyurea Spray Coating

Polyurea Waterproofing Specialists in the UAE

A two-component, spray-applied elastomeric membrane that cures in minutes into a seamless, joint-free barrier, ideal for large roofs, tanks, podiums and floors.

  • Roofs, tanks & floors
  • Cures in minutes
  • 350%+ elongation
Established 2022All 7 EmiratesUp to 10-Yr WarrantyDM-Registered MaterialsFree Site InspectionIn-House Crews
Polyurea Spray Coating in the UAE by EverSeal, waterproofing companySpray-applied, seamless polyurea membrane

Free site inspection

We assess and quote at no cost, anywhere in the UAE.

Seamless systems

Joint-free polyurea and PU with no laps to fail.

Up to 10-year warranty

On completed works, backed in writing.

DM-registered materials

Approved systems with full data sheets.

Overview

Why polyurea spray coating matters in the UAE

Polyurea is one of the most advanced waterproofing technologies available, and it is especially suited to the UAE. It cures within seconds, so large areas can be sealed fast with minimal downtime; it has very high elongation, so it bridges cracks and absorbs the thermal movement UAE structures see daily; and it resists UV, abrasion and chemicals. Applied by trained operators with heated spray equipment, it forms one continuous membrane with no laps to fail.

What we offer

Why polyurea performs

Seamless & jointless

One continuous membrane sprayed in place, no laps, the number-one failure point of sheet systems.

Extreme durability

High tensile strength with excellent abrasion and puncture resistance for trafficked areas.

UV & heat resistant

Withstands UAE surface temperatures and daily thermal cycling without cracking.

Fast application

Rapid coverage of large areas with cure in minutes, keeping buildings operational.

Warning signs

Signs you need polyurea spray coating

Spot these early and a small fix stays small. Book a free inspection before it spreads.

  • A large roof, podium or tank that needs a fast, seamless solution
  • Repeated failures at joints and laps in a sheet system
  • A structure that moves and cracks conventional coatings
  • A surface exposed to heavy foot or light vehicle traffic
  • A project needing minimal downtime during application
Who we serve

Who we deliver polyurea spray coating for

From a single villa to large government facilities, our polyurea spray coating scales to any project.

Residential

Villas, apartments and townhouses across the UAE.

Commercial

Offices, retail, malls and hotels.

Industrial

Warehouses, factories and logistics facilities.

Government

Schools, clinics and public-sector facilities.

Where we apply it

Polyurea Spray Coating applications

  • Roofs & podiums
  • Water tanks
  • Wet areas
  • Industrial floors
  • Parking decks
  • Secondary containment
Benefits

Benefits of professional polyurea spray coating

  • A seamless membrane with no joints to fail
  • Bridges cracks and handles thermal movement
  • Fast cure means minimal disruption
  • Excellent UV, abrasion and chemical resistance
  • Applied to a measured, tested thickness
How we work

Our polyurea spray coating process, step by step

1

Free inspection

We visit the site, diagnose the problem and assess the substrate at no cost.

2

Surface preparation

Cleaning, crack and spall repair, and preparing the substrate.

3

Priming

A bonding primer is applied so the system adheres fully.

4

Application

The chosen system is applied to the specified thickness by trained crews.

5

QC and testing

Film-thickness checks and a water or holiday test confirm a continuous barrier.

6

Handover and warranty

Clean site, a report, sign-off and your warranty certificate.

Materials and standards

Materials we use for polyurea spray coating

We build this system on Kanz Chemical materials registered with Dubai Municipality (DM), supplied with full technical (TDS) and safety (MSDS) data sheets for consultant and authority approval. Potable-water and Civil Defence suitability is confirmed where required, and every completed system is handed over with a warranty certificate of up to 10 years.

CRESPOL PR-P

Pure (aromatic) polyurea

CRESPOL PR-I

Hybrid polyurea

CRES FLEX 201

Aliphatic UV topcoat

CRES FLOOR EP 100

Epoxy primer

Products are selected per project after inspection. Equivalent DM-approved systems are used where a specification requires.

Why EverSeal

Why choose EverSeal for polyurea spray coating

Seamless, joint-free systems

No laps or seams to fail, removing the most common cause of leaks.

Built for the UAE climate

UV resistance, thermal-cycling tolerance and crack-bridging over 350%.

DM-registered materials

Manufacturer-backed systems with full technical and safety data sheets.

Up to a 10-year warranty

On completed works, with responsive after-sales support.

Trained in-house crews

Measured film thickness and testing on every job, with no sub-contracting.

Clear, honest quotes

A free inspection and an itemised quote with no surprises.

Questions and answers

Polyurea Spray Coating: frequently asked questions

Common questions we are asked about polyurea spray coating in the UAE.

What surfaces can polyurea be applied to?
Concrete, metal and many prepared substrates, we prime each surface for maximum adhesion.
How thick is the membrane?
Typically applied at around 2 mm dry film thickness, verified during application.
Is polyurea suitable for the UAE climate?
Yes, its UV resistance and thermal-cycling tolerance make it ideal for UAE roofs and tanks.
Can you walk or drive on it?
Yes, polyurea is tough enough for foot traffic and, with the right build, light vehicle traffic.
How is quality checked?
We verify dry-film thickness and carry out holiday (pinhole) testing before handover.
Local coverage

Polyurea Spray Coating across the UAE

Based in Musaffah, Abu Dhabi, we deliver to every emirate. Open an emirate below to see the districts we serve.

Abu Dhabi12 areas
  • Musaffah
  • ICAD
  • KIZAD
  • Khalifa City
  • Mohammed Bin Zayed City
  • Al Reem Island
  • Saadiyat
  • Yas Island
  • Al Raha
  • Al Shamkha
  • Al Wathba
  • Al Maryah
Waterproofing company in Abu Dhabi →
Dubai14 areas
  • Al Quoz
  • DIP
  • Business Bay
  • JLT
  • Dubai Marina
  • Al Barsha
  • Jumeirah
  • Deira
  • Bur Dubai
  • Silicon Oasis
  • JVC
  • Arabian Ranches
  • Dubailand
  • Al Warqa
Waterproofing company in Dubai →
Sharjah10 areas
  • Industrial Area
  • Muweilah
  • Al Nahda
  • Al Majaz
  • Al Qasimia
  • Al Suyoh
  • Al Taawun
  • Al Khan
  • Al Rahmaniya
  • University City
Waterproofing company in Sharjah →
Ajman8 areas
  • Al Nuaimiya
  • Al Rashidiya
  • Al Jurf
  • Industrial Area
  • Al Mowaihat
  • Al Zorah
  • Al Rawda
  • Al Hamidiyah
Waterproofing company in Ajman →
Al Ain9 areas
  • Al Jimi
  • Al Mutaredh
  • Al Muwaiji
  • Zakher
  • Al Hili
  • Al Towayya
  • Al Foah
  • Al Khabisi
  • Al Sarooj
Waterproofing company in Al Ain →
Ras Al Khaimah8 areas
  • Al Nakheel
  • Al Hamra
  • Al Dhait
  • Industrial Area
  • Al Rams
  • Julphar
  • Khuzam
  • Al Qusaidat
Waterproofing company in Ras Al Khaimah →
Fujairah7 areas
  • Fujairah City
  • Dibba
  • Al Faseel
  • Merashid
  • Sakamkam
  • Industrial Area
  • Mirbah
Waterproofing company in Fujairah →
Umm Al Quwain7 areas
  • UAQ City
  • Al Salamah
  • Al Raas
  • Al Haditha
  • Industrial Area
  • Falaj Al Mualla
  • Al Riqqa
Waterproofing company in Umm Al Quwain →
2022Established in the UAE
14Services
7Emirates served
60+Areas covered
Polyurea specialists

Get a professional polyurea waterproofing assessment

Polyurea is machine-applied and unforgiving of poor preparation, so it pays to speak with the crew who will actually spray it. We will assess your substrate and confirm the right grade and thickness.

  • Calibrated spray equipment
  • Measured film thickness
  • Holiday (pinhole) tested

+971 50 442 4730 or +971 55 591 1894

EverSeal waterproofing work in the UAE
WhatsApp Call